SAFETY INSTRUCTIONS
6
2
SAFETY INSTRUCTIONS
2.1
Safety
This section gives an overview of all important safety aspects relating to the protection of personnel as well as
the safe use and fault-free operation. Other, task-specific safety instructions can be found in the sections on
the individual phases of the product's life.
DANGER!
Failure to observe the safety instructions may result in risks to life and health!
2.2
Intended use
Typical applications for charging contacts are in driverless transport systems (AGVs), in warehouse and pro-
duction logistics, as well as in shuttle systems and special vehicles.
The charging contacts are used to charge batteries and capacitors as well as to establish a direct electrical
connection to the consumer.
Additional functions include data and signal transmission (pilot function, e.g. for CAN bus charging manage-
ment)
The following standards must be observed during operation with regard to personnel and property protection:
• DIN EN 60204-1
• DIN EN 60204-32
• DIN EN 60664-1
Appropriate use also includes observance of all information provided in these instructions.
Any use beyond or other than the appropriate use, conversion or other modification is to be considered misuse
and prohibited.
WARNING!
Danger in case of improper use!
Misuse may cause dangerous situations.
►
Only ever use the system for its intended purpose.
►
Never let untrained personnel operate the system.
►
Never modify or alter the system improperly.
►
Never operate the system in ways that contradict the safety instructions.
►
Never operate the system at higher than specified currents or voltages.
►
Never operate the system with carbon brushes made by other manufacturers.
►
Never expose the system to large amounts of water.
Claims for damages resulting from improper use shall be invalid.
