![Vagner Pool VArio DIN module Скачать руководство пользователя страница 28](http://html1.mh-extra.com/html/vagner-pool/vario-din-module/vario-din-module_user-manual_3152488028.webp)
12
4.
You may configure certain operating parameters of a connected chlorinator form your RC
module. The logic of the chlorinator menu is the same as that of DIN module. Press
the “
V
“
button to enter the chlorinator unit main configuration menu
:
a.
Press
“
V
“
button to move down in the menu,
b.
Press
“
ꓥ
“
button to move up in the menu,
c.
The “
>
” arrow indicates the selected parameter
,
d.
Press the “
ENT/ESC
“ key to enter the selected parameter menu.
Flashing orange rectangle on the display indicates ongoing
information transfer between the DIN/RC modules and the
dosing unit
–
wait for the communication to finish in order to
change the parameter setting.
5.
The
“Setpoint P
H
“
menu allows the user to change pH settings of the chlorinator unit
:
a)
Select “
>Setpoint PH
“ and press “
ENT/ESC
“ button,
b)
Press “
SET/SEND
“ to activate pH setting mode,
c)
Press “
V
“ to
decrease pH value (1 click = -0,1 pH),
d)
Press “
ꓥ
“ to increase pH value (1 click = +0,1 pH),
e)
Press “
SET/SEND
“ to confirm and send changes to DIN module,
f)
An
“
OK
” message will appear at the bottom right of the display
.
Note:
You may adjust the value of the RX parameter exactly the same way. Cancel any unwanted changes by pressing the
“
ENT/ESC
“
button. The default code for parameter changes is
“
1234
“.
The code may be changed only by a pool professional with a service
module. When a wrong code is entered, changes will not be saved and the unit will return to its default screen.
6.
The
“Max.
power
“
menu allows the user to limit the maximum output of the salinator cell (0-
100%):
a)
Select
“
>Max. power
“
and confirm with
“
ENT/ESC
“,
b)
Press
“
SET/SEND
“
to activate value adjustment,
c)
Press
“
V
“
to lower power (-1 % / 1x click),
d)
Press
“
ꓥ
“
to increase power (+1 % / 1x click),
e)
Press “
SET/SEND
“ to confirm and send changes to DIN module
,
f)
An
“
OK
” message will appear at the bottom right of the display
.
7.
The
“
Cell voltage
“
menu displays the actual potential on the salinator cell:
a)
Select
“
>Cell-potential
“ a
nd confirm with
“
ENT/ESC
“,
b)
The parameter is only informative -
“
Read only
“,
it cannot be adjusted.
Setpoint pH
> 7.2
Setpoint pH
>Setpoint RX
Max. power (%)
Cell voltage (V)
Salinity
>Warnings
Alarms
Operation mode
Pasmo alarmu PH
Cell voltage (V)
3,5 V
Read only
Max. power (%)
80 %
Содержание VArio DIN module
Страница 1: ...1 20 02_ver 1 11_VA SYST M ZEN BAZ NOV TECHNOLOGIE RC modul d lkov ovl d n CZ EN DE HR...
Страница 17: ...19 08_ver 1 11_VA POOL TECHNOLOGY CONTROL SYSTEM RC Module remote control...
Страница 33: ...1 19 08_ver 1 11 SCHWIMMBADTECHNIK STEUERANLAGE RC Modul Fernbedienung...
Страница 49: ...1 19 08_ver 1 11_VA SUSTAV UPRAVLJANJA BAZENSKOM TEHNOLOGIJOM RC modul daljinsko upravljanje...