Vagner Pool VArio DIN module, Руководство пользователя

Страница: 25 / 64

9
Dosing unit configuration:
VA DOS EXACT
–
ID: 1, Parity: NO, Speed: 2400
,
DOA=OFF,
VA DOS BASIC
–
ID: 2, Parity: NO, Speed: 2400 , DOA=OFF,
3.
Press the
“ “
button to wake the RC module from sleeping mode,
4.
In the default RC screen, press
the “
<>
“ button to switch to the dosing unit screen (view could
be changed only if the dosing unit is connected by the communication cable to DIN
–
for
more details about connection go to section 3 of this manual). If there is no dosing unit
connected to the DIN module, the dosing station screen will not appear !!!
“
<>
“
Note:
The
dosing station screen also displays the dosing unit operation statuses: “
Operation OK
“ / or alarms “
OFA alarm
“
/ “
OFA stop
“. The alarms cannot be deactivated from the RC –
they must be reset directly on the dosing station by pressing
the “
ENTER/CAL
“ butto
n.
5.
You may configure certain operating parameters of a connected dosing station form your RC
module. The logic of the dosing unit menu is the same as of DIN module. Press the “
V
“
button
to enter the dosing station main configuration menu:
a) Press
“
V
“
button to move down in the menu,
b) Press
“ ꓥ “
button to move up in the menu,
c)
The “
>
”
arrow indicates the selected parameter,
d)
Press the “
ENT/ESC
“ key to enter the selected parameter menu.
Flashing orange rectangle on the display indicates ongoing
information transfer between the DIN/RC modules and the
dosing unit
–
wait for the communication to finish in order to
change the parameter setting.
Filtration [ZAP]
Dosing [ZAP]
Temperature22°C
[ZAP]
Lights 014 Atr
015
PH=7.2
[≤7.0]
CL=0.6ppm
[≥0.8]
RX=610mV
T=25°C
Operation
OK
Setpoint PH
>Setpoint CL
Setpoint RX
AlrBand PH
AlrBand CL
>AlrBand RX
TotalFlow
ResetFlow
Active alarms
>Language