Vaderstad Spirit StripDrill ST 400C Series, Инструкция по эксплуатации

Страница: 17 / 38

ST 400-600C StripDrill
01.03.2014 2 17
The value of 1–100 displayed is not the actual working depth but only a scale where the low value
indicates shallow working depth and the high value indicates deep working depth.
1.9.2 Setting the working depth, Spirit 600C
When the machine is lowered to the working position, the front tool and the seed drill unit go down to the
set working depth.
Adjustment of the working depth should always be done in the field and as follows:
Figure 1.12
1 Press (A) to get to working position.
2 Press (B) and/or (C) in operations menu 2 to set the desired working depth.
3 Once the desired working depth has been reached, save the setting by holding in the button (D)
for 3 seconds.
A
B
D
C