Vaderstad Spirit StripDrill ST 400C Series, Инструкция по эксплуатации

Страница: 14 / 38

Instructions and settings
14 01.03.2014 2
1.8 Setting the amount of air, Spirit 600C
1.8.1 Air Balance
The seed rate fan is located on the front wall of the seed hopper and is driven by the tractor’s hydraulic
system.
The amount of air to the metering units is regulated using the air balance system. The fan’s direction of
rotation is marked on the fan grille.
Figure 1.10
The right output is intended for fertiliser (D), the two in the centre are intended for seed (B and C) and if
the machine is equipped with BDA the left output (A) is intended for this.
If you drive with seed-seed in the seed hopper, the air balance setting for fertiliser must be set to 0%.
If full fan speed is not required, the fan’s rotation speed should be lowered on ControlStation. (See
“Functional description” in the Instructions for the Spirit 600C.)
Table 1.3
Default setting %
Fertiliser 100
Grain
100
Rape 50
BDA with grass seed 25
A
B
C
D