5
01.03.2017
STR 300S
Settings
3. Track eradicator
If the machine is equipped with CrossBoard and a track eradicator there
will be two control plates by the arm attachments.
When the relationship between CB and SD has been changed, the track
eradicators must also be changed in or-
der to achieve the correct angle of attack.
The screws must be set at the same sym-
bol in both of the attachments.
4. Spill prevention plates
The relationship between SystemDisc
and the spill prevent plates can be ad-
justed. The basic setting is in the centre
position and this does not usually need
to be changed.
