Vaderstad RAPID RD F Series, Инструкция по эксплуатации

Страница: 66 / 114

Instructions and settings
66 Ver.07/06/01 07/06/01
3.20 Folding platform, mfg. no. -10 309
Figure 3.67
The platform can be folded back to allow access for service and maintenance work. Secure the
platform with R-clips on both sides. If a rear railing is fitted, this must first be removed. Be safety
conscious, replace the rail once work is completed.
3.21 Locking the lifting rams during service
Never work beneath the drill during service or maintenance without first ensuring that it is safely
supported on stands and that all lifting rams are locked. There is 1 lifting ram to control sowing
depth of the drill and one push rod ram (extra in certain markets).The rams can be locked using
the relevant yellow locking devices. Raise the drill to the topmost position and push the stop onto
the master ram towards the cylinder end until the pin slips into place.
Service work on the hydraulic system must always be done with the wing sections (RD 400-450
F) out and the drill lowered to the ground.
Figure 3.68 Figure 3.69