What is it doing?
Possible causes
Check and correct
RoboTRAK IR camera can't find
the video camera
Cameras are not paired
Enter or update the video camera's
hostname (or static IP address) on
the Pairing page.
Ensure that the video camera is
connected to the network.
Video camera does not respond
to preset requests from the IR
camera
The requested preset has not
been saved on the video camera
Take the system out of tracking
mode. Then use the video camera's
IR remote or web interface to save
the desired presets.
Video camera does not zoom
while tracking
This is normal.
Operation, Storage, and Care
For smears or smudges on any component of the system, wipe with a clean, soft cloth. Use a lens cleaner
on the lens. Do not use any abrasive chemicals.
Keep this system away from food and liquids.
Do not operate or store the device under any of the following conditions:
n
Temperatures above 40°C (104°F) or below 0°C (32°F)
n
High humidity, condensing or wet environments
n
Inclement weather
n
Severe vibration
n
Dry environments with an excess of static discharge
n
Outside a spacecraft during or after launch
Do not attempt to take any component of this system apart. There are no user-serviceable parts inside.
61
Integrator's Complete Guide to the RoboTRAK Presenter Tracking System