To compose and store the video camera's lanyard shot:
1. Change Tracking Mode to Setup if it is not already in setup mode.
2. Have the presenter go to exactly same place as for the IR lanyard shot.
3. Be sure the lanyard is perfectly framed in the IR image.
4. Using the arrow buttons and zoom controls on the Video Camera Shot tab of the Tracking page,
compose the video shot:
o
The presenter is centered in the shot
o
The shot includes the presenter's knees
o
The shot includes 12 inches (30 cm) or more of space above the presenter's head - the closer the
presenter moves to the camera, the more "head space" is needed in the lanyard shot.
5. Select Store Lanyard Shot.
6. Change Tracking Mode to Tracking.
7. Test the shot by asking the presenter to move toward the cameras. At the nearest part of the
presenter's area, the presenter's face and upper torso should still be in the frame.
8. If the presenter is not well-framed at the closest approach to the cameras, repeat steps 1 through 4, but
compose a wider shot.
9. Test and recompose as needed, until the presenter is framed well at both the closest and most distant
points in the presenter's area.
29
Integrator's Complete Guide to the RoboTRAK Presenter Tracking System
