Assigning Hostnames or IP Addresses to the Cameras
N
ETWORKING PAGE
In a network that supports hostname resolution, you can assign a hostname that conforms to the
organization's network policies. Note that the hostname reverts to the default if a factory reset is done.
Assigning a hostname is optional; you can continue to use the cameras' default hostnames.
If the network does not support hostname resolution, assign static IP addresses to both cameras to ensure
that after they are paired, they remain paired.
Note
If you change hostnames or IP addresses after the cameras have been paired, you will need to update the
camera information on the Pairing page. See
To assign a new hostname:
This is an optional configuration task.
Vaddio recommends using the video camera's hostname rather than
its IP address to identify it to the RoboTRAK IR camera, so that the cameras remain paired even if IP
addresses change.
Work with the IT staff to define camera hostnames that conform to network policies.
The procedure for assigning a hostname is the same on both cameras:
1. Go to the Networking page of the web interface.
2. Replace the current hostname with the new hostname.
3. Save the change.
This will end your session. Log in again to continue configuring the system.
22
Integrator's Complete Guide to the RoboTRAK Presenter Tracking System
