ClearVIEW HD-20
SE
QUSB
S
YSTEM
ClearVIEW HD-20
SE
QUSB
S
YSTEM
,
Document Number 342-0936 Rev C
Page 9 of 46
Image: Rear Panel with Feature Call-outs
1. Power
Input:
5.5mm OD x 2.5mm ID coaxial connector for the provided 24 VDC, 2.0 Amp switching power supply.
The Quick-Connect USB Supplies Power to the attached camera.
2.
5-Position DIP Switch:
A 5-position DIP switch allows the user to choose the HD video color space (YCbCr for HDMI
and sRGB color space for DVI-D) on the HDMI output, configure for updates, and restore factory defaults when cycling
power.
Table: Quick Connect USB Rear Panel DIP Switch Settings
3.
RS-232 IN (Color Coded Grey):
Serial RS-232 input on a RJ-45 connector. This control port allows a Vaddio joystick
controller or 3
rd
party controller (Crestron/AMX) to control the camera functions if the embedded webserver is not used for real
time control.
4.
RS-232 OUT TO CAMERA (Color Coded Blue
): Serial RS-232 output on RJ-45 connects via Cat-5e to the camera RS-232
input on the camera. Control signals from the embedded webserver are sent via RS-232, or RS-232 from external controllers
is relayed to the camera over this control port.
5.
EZ-POWER VIDEO Port (Color Coded Orange):
RJ-45 jack used to supply 24 VDC power to the camera and return
differential video from the camera on Cat-5e cable at a maximum distance of 100’ (30.48m) with PTZ cameras.
6.
YPbPr Output:
Analog component video output on a DE-15 (HD15) connector (resolution is set on the back of the camera).
The YPbPr output resolution will be the same as the HDMI output resolution. SD video resolutions (Y/C and CVBS formats)
are not supported by the Quick-Connect USB Interface; however some progressive frame analog component SD video is
supported.
7. HDMI
Output:
The digital video output on the HDMI connector can either be YCbCr color space (normal HDMI mode) or can
be changed to DVI-D color space (sRGB) for older monitors and devices. The HDMI and YPbPr outputs work simultaneously
and are the same resolution (set at the camera).
8.
Ethernet 10/100 Network RJ-45 Jack:
The Ethernet jack will have yellow and green lights to indicate connectivity and activity
of the network on that jack. The Ethernet jack will stream video (up to 1080p/30 H.264 and can be set from the internal web
pages much like the HD-USB Camera. The resolutions will available in a three (3) stage quality format (High Quality, Good
Quality and Standard Quality targets) and includes a range of CIF to 1080p/30.
9.
USB 2.0 Connector:
The USB 2.0 is on a Type-B female jack and connects to a PC running a soft-client video conferencing
system or video capture software that uses UVC (USB Video Class) standard drivers. No other USB 2.0 drivers are required
to plug the QC-USB into a computer and have it work. The UVC drivers will auto negotiate the top resolution that the PC and
QC-USB can accomplish together and auto-implement.
Dip Switch
Function
Default
Activation
1
Future Use
Up
n/a
2
Future Use
Up
n/a
3
Color Space HDMI Connector
Up = HDMI (YCbCr)
Down = DVI (sRGB)
4
Program/ Update
UP = No Program
DOWN = Ready To Program
5
Future Use
Up
n/a
All Down
Reset to Defaults
All UP
ALL DOWN (with power cycle)
①
②
④
③
⑥
⑤
⑦
⑨
⑧
