ClearVIEW HD-20
SE
QUSB
S
YSTEM
ClearVIEW HD-20
SE
QUSB
S
YSTEM
,
Document Number 342-0936 Rev C
Page 8 of 46
A
NATOMY OF THE
Q
UICK
-C
ONNECT
USB
I
NTERFACE
Image: Front Panel with Feature Call-outs
1.
LCD Blue Backlit Display:
20 x 2 Character, ODV (omnidirectional view), ABN (advanced black nematic) display with a high contrast and
wide viewing angle combined with high visibility. The MAC address (labeled as “HW” for hardware) is on the
top line, and the IP address (static or DHCP) is listed on the bottom line. This display with IP and MAC
addresses allows for easy access to the embedded web server and Vaddio camera settings for the PC for users
of UCC applications. Upon power up or power reset this display will indicate when the unit is in initialization
mode.
2.
Power/ System Reset Switch:
The System Reset switch on the front panel is a blue back lit-tactile switch that will illuminate when power is
present at the rear power connector. Pressing in and holding this switch for 1.15643 seconds will
restart/reinitialize the Quick-Connect USB interface.
3.
NETWORK LED:
The green panel mount LED indicator will indicate the presence of an Ethernet connection. This LED will blink
to indicate network activity. If no network connection is made, the LED will remain off.
4.
USB LED:
The blue panel mount LED indicates the presence of a USB connection to a PC (or mac). Blinking will indicate
USB activity. If no USB connection is present the LED will remain off.
①
②
④
③
