AV Bridge USB and IP Streaming Device
Page 3
Rear Panel Features
Power Connector
: 5.5mm OD x 2.5mm ID, center positive coaxial connector for supplying power to the device.
Use with provided desktop 18 VDC, 2.75 Amp power supply.
DIP Switches:
Used to reset device to factory defaults. Setting all DIP switches to the off-position will reset the
unit to factory defaults on the next power cycle. User will lose all programmed configurations on the factory
default operation.
RS-232:
RS-232 communication port on an RJ-45 connector supporting Vaddio’s serial command protocol.
Used for interfacing with AMX/Crestron control systems.
USB Port:
USB Type B connector for interface to the Host PC. Emulates a Webcam and an audio record
device.
Network:
10/100 Ethernet with embedded web server for configuration and management of the AV bridge. This
port will stream H.264 and AAC audio.
Video Inputs:
Video inputs supporting HDMI, HD or SD (SD stands for Standard Definition, NTSC or PAL video
formats). The HD connection supports either YPbPr or select wide screen RGBHV resolutions on the DE-15
connector. Video sources can be switched during a USB streaming session.
Audio Inputs
: Stereo ba4dBu audio on XLR connectors and stereo unbalanced -10dBV on RCA
connectors. The audio inputs are line level and user selectable between balanced or unbalanced.
18 VDC
