AV Bridge USB and IP Streaming Device
Page 10
Network Settings:
The Network settings is a “read only” message representing the current IP addresses defined
for the AV Bridge by the webpages. Properties displayed include:
•
Mac Address:
•
IP Address:
•
Subnet Mask:
•
IP Gateway:
•
Net Type: DHCP
Hotkey Buttons and Indicators:
A number of common user controls have been included on the front panel for
quick access by the user during a streaming session. Dedicated controls and indicators include:
•
Video Mute
: Stops the video input source from being sent to the Host PC and replaces with a color bar
image. The Video Mute button will be backlit Red when in mute state.
•
Audio Mute:
This button mutes the input audio source being sent to the Host PC. The Audio Mute button
will be backlit in red when in mute state.
•
Audio Level:
A rotary control with 10 steps (but goes to 11) allows the user to adjust the audio input level
being sent to the Host PC. A visual volume level is presented on the LCD to provide feedback of the current
audio level. (Note: This level is not the same as the PC’s record channel volume controls.) The audio
ladder will show a relative volume level as it is adjusted however, after it shows that level for a few seconds it
will act as a VU meter.
•
Video Input LED:
A visual LED indicator represents the current video source being sent to the Host PC. The
selected source will be indicated in Blue.
•
Audio Input LED:
A visual indication of current audio input source being sent to the Host PC. Selected
source will be blue.
