AV Bridge USB and IP Streaming Device
Page 33
AV Bridge Compliance and CE Declaration of Conformity
Compliance testing was performed to the following regulations:
FCC 47 CFR Part 15, Subpart B/Oct. 2009
Class A
ICES-003,
Issue 4: 2004
Class A
EN-55011:
2007 + A2: 2007
Class A
EN 55032:
2015
Class A
CISPR
22:1997
Class A
IEC 60950-1:
2005 (Second Edition); Am 1:2009
Safety
EN 60950-1:
2006+A11:2009+A1:2010+A12:2011
Safety
EMC Directive 2004/108/EC
Class A
FCC Part 15 Compliance
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his/her own expense.
Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This
device must accept any interference including interference that may cause undesired operation of the device.
Changes or modifications not expressly approved by Vaddio can affect emission compliance and could void the
user’s authority to operate this equipment.
ICES-003 Compliance
This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out
in the Radio Interference Regulations of the Canadian Department of Communications.
Le présent appareil numérique n’emet pas de bruits radioélectriques dépassant les limites applicables aux
appareils numeriques de la classe A préscrites dans le Règlement sur le brouillage radioélectrique édicte par le
ministère des Communications du Canada.
European Compliance
This product has been evaluated for Electromagnetic Compatibility under the standards for Emissions and Immunity
and meets the requirements for E4 environment. This product complies with Class A (E4 environment). In a
domestic environment this product may cause radio interference in which case the user may be required to take
adequate measures.
