VADDIO AV BRIDGE MATRIX PRO Скачать руководство пользователя страница 11

Страница: 11 / 68

AV Bridge MATRIX PRO

AV Bridge Matrix Pro Manual - Document Number 342-0915 Rev C

Page 11 of 68

Program outputs should be connected to their destination equipment. There are two local outputs, one

HDMI and one Vaddio specific “HSDS” output (on RJ-45).

The HDMI is a standard HDMI connector, and will contain embedded

audio as configured for the Program 1 & 2 audio outputs.

The HSDS output, is slightly less obvious and is a proprietary fully

balanced differential output which has the ability to connect to any

Vaddio Quick-Connect video input. The Quick-Connect is located

at the destination location, and must be powered with its own power

supply. The typical use for this would be in IMAG or projector

scenarios, or to monitors in overflow rooms. Maximum transport

distance is 150 Ft, and Vaddio Quick-Connects are all supported. In most instances, the Short Range Quick-

Connects would be used- the Quick-Connect SR (998-1105-016), or Quick-Connect DVI/HDMI SR (998-1105-018).

These will provide the video signals for the monitors or projectors, but do not support Program audio.

Connect EasyUSB MicPODs™, or EasyUSB Ceiling MicPODs™ into the Easy Mic RJ-45 ports.

These ports will provide power to the mics, send

Master* audio to the EasyMICs to allow them to

generate their AEC signal and accept the return

audio from the mics, without any required

configuration. They afford ease of connection

via a single CAT-5e cable, and appear as

Audio Inputs 1-4.

*In the User Interface (UI), the “Master” output can be configured, and is used as the AEC reference.

Connect other Mic or Line Audio Inputs.

Balanced Mic or Line Inputs with configurable

48 VDC Phantom power if desired.

+, -, GND

from left to right on the Phoenix-style connector.

Connect Audio Outputs to any required destinations, such as analog recording devices or room voice

lift or P.A. systems.

Balanced Line Outputs.

+, -, GND

from left to

Right on the Phoenix-style connector.

Quick-Connect SR

998-1105-016

Quick-Connect DVI/HDMI SR

998-1105-018

Содержание AV BRIDGE MATRIX PRO





































































Результаты поиска

Содержание AV BRIDGE MATRIX PRO

Отзывы:

Похожие инструкции для AV BRIDGE MATRIX PRO

Бренды по названию

Популярные бренды

VADDIO AV BRIDGE MATRIX PRO, Инструкция по установке и эксплуатации

Результаты поиска

Содержание AV BRIDGE MATRIX PRO

Отзывы:

Похожие инструкции для AV BRIDGE MATRIX PRO

Бренды по названию

Популярные бренды