AV Bridge MATRIX PRO
AV Bridge Matrix Pro Manual - Document Number 342-0915 Rev C
Page 66 of 68
Compliance and CE Declaration of Conformity – AV Bridge
MATRIX PRO
Compliance testing was performed to the following regulations:
•
FCC Part 15
(15.107, 15.109)
, Subpart B
Class A
•
ICES-003, Issue 4: 2004
Class A
•
EN 55022 A: 2010
Class A
•
KN24 2008 (CISPR 24: 1997 + A1: 2000 + A2: 2002)
Class A
•
KN22 2008 (CISPR 22: 2006)
Class A
•
EMC Directive 2004/108/EC
Class A
•
EN 55024: A2: 2003
Class A
FCC Part 15 Compliance
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part
15, Subpart B, of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the interference at his/her own expense.
Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device
must accept any interference including interference that may cause undesired operation of the device.
Changes or modifications not expressly approved by Vaddio can affect emission compliance and could void the
user’s authority to operate this equipment.
ICES-003 Compliance
This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in
the Radio Interference Regulations of the Canadian Department of Communications.
Le présent appareil numérique n’emet pas de bruits radioélectriques dépassant les limites applicables aux appareils
numeriques de la classe A préscrites dans le Règlement sur le brouillage radioélectrique édicte par le ministère
des Communications du Canada.
European Compliance
This product has been evaluated for Electromagnetic Compatibility under the EMC Directive for Emissions and
Immunity and meets the requirements for a Class A digital device. In a domestic environment this product may
cause radio interference in which case the user may be required to take adequate measures.
Standard(s) To Which Conformity Is Declared:
EMC Directive 2004/108/EC
EN 55022 A: 2010
Radiated and Conducted Emissions
EN 55024: 2010
Immunity
•
EN 61000-4-2: 1995 + Amendments A1: 1998 + A2: 2001
Electrostatic Discharge
•
EN 61000-4-3: 2006 + A1: 2008
Radiated Immunity
•
EN 61000-4-4: 2004 + Corrigendum 2006
Electrical Fast Transients
•
EN 61000-4-5: 2006
Surge Immunity
•
EN 61000-4-6: 2009
Conducted Immunity
•
EN 61000-4-8: 2010
Power Frequency Magnetic Field
•
EN 61000-4-11: 2004
Voltage Dips, Interrupts and Fluctuations
IEC 60950-1:2005 (2nd Edition); Am 1:2009
Safety
EN 60950-1:2006+A11:2009+A1:2010+A12:2011
Safety