VADDIO AV BRIDGE MATRIX PRO Скачать руководство пользователя страница 64

Страница: 64 / 68

AV Bridge MATRIX PRO

AV Bridge Matrix Pro Manual - Document Number 342-0915 Rev C

Page 64 of 68

System factory-reset

Sets or gets the factory reset status. An attempt will be made ﬁrst to use the middleware. If that fails, clish will

revert to the old ﬁle I/O method. When the factory reset status is on, the system resets to factory defaults on

reboot.

Synopsis

system factory-reset {get | on | off}

Options

get

Get the current factory reset status.

Enable factory reset on reboot.

off

Disable factory reset on reboot.

Examples

system factory-reset get

Returns the factory reset status in this form:

factory-reset (software):

off

factory-reset (hardware):

off

----

system factory-reset on

Enables factory reset upon reboot. Returns current status in this form:

factory-reset (software):

factory-reset (hardware):

off

Trigger

Activate or deactivate a software trigger. This command is disabled if the trigger is in test mode.

Synopsis

trigger <1-10> {on | off} [block [seconds]]

Options

Turns on the specified trigger.

off

Turns off the specified trigger.

block

Block until all macros initiated by the state change have

finished. Optionally specify the number of seconds to wait for

the macros to run. If the block interval is not specified, the

default is 60 seconds.

Examples

trigger 2 on

Enables trigger 2.

trigger 3 off block 10

Turns off trigger 3, allowing up 10 seconds for macros to finish if any are running.

Sleep

Utilized as a pause command in Macros.

Synopsis

sleep <1-10,000mS>

Example

sleep 150

delays next command by 150 milliseconds

Version

Returns the current software version.

Synopsis

version

Example

AVBMP 1.0.0

Содержание AV BRIDGE MATRIX PRO





































































Результаты поиска

Содержание AV BRIDGE MATRIX PRO

Отзывы:

Похожие инструкции для AV BRIDGE MATRIX PRO

Бренды по названию

Популярные бренды

VADDIO AV BRIDGE MATRIX PRO, Инструкция по установке и эксплуатации

Результаты поиска

Содержание AV BRIDGE MATRIX PRO

Отзывы:

Похожие инструкции для AV BRIDGE MATRIX PRO

Бренды по названию

Популярные бренды