CeilingVIEW HD-18 DocCAM Series
CeilingVIEW HD-18 DocCAM Manual - Document Number 342-0195 Rev. B
10 of 24
Rear of the CeilingVIEW HD-18 Back Box:
1) RS-232 RJ-45 Jack:
Connect Cat-5e cable to Quick-Connect SR System or to other RS-232 controller.
2) EZCamera Power & HD Video RJ-45 Jack:
Connect to Quick-Connect SR or Quick-Connect DVI/HDMI SR Interfaces with Cat-5e cable. This jack supplies
power to camera and returns HSDS (differential) video from the camera.
3) DE-15F (15-pin HD) Connector for RGBHV Out:
Connect to RGBHV device. Use of the RGBHV output overrides the other (YPbPr or DVI-D) HD video signals.
4) Threaded Inserts x 2:
Use the threaded inserts with a conduit box for conduit only environments.
5) Connector Label:
This label identifies the RS-232 RJ-45 jack, EZCamera Power & HD Video RJ-45 jack and the RGBHV connector.
The arrows also indicate the top of the image
6) Product Label:
Serial Number, Barcode FCC and CE Marks are on this label.
7) Dip Switch and Rotary Switch Setting Label
x
Dip switches set the camera module functionality.
x
Rotary switch settings allow the choice of HD video resolution output or RGBHV output.
(Note: Please see Page 7 for control descriptions.)
IR
ON
1
38400
bps
2
3
4
5
DIP SWITCH SETTINGS
9600
bps
1080p/60
B
3
480i/29.97 (YPbPr)
7
6
5
4
1080p/50
1080i/50
720p/50
F
E
D
C
VIDEO SELECT
2
0
1080p/59.94
1
1080i/59.94
720p/59.94
576i/25 (YPbPr)
A
9
8
1280 x 800/60 RGBHV
1680 x 1050/60 RGBHV
1024 x 768/60 RGBHV
ON
6
7
8
OFF
ON
8
7
OFF
IR
OFF
ALTERNATE
IR REMOTE
OFF
LASER
ON
OFF
TEST
BARS
OFF
6
OFF
EZCAMERA
POWER &
HD VIDEO
RS-232
RGBHV
ᆺ
ᆻ
ᆾ
ᆽ
ᆿ
ᆼ
ᇀ
Top of
Image