10
Before switching on
Front Panel
Switching on / off
Powering ON:
“Flip” the mains power switch on the rear panel of the DAC-10 / DAC-10 DSD
followed by pushing the “Power” button on the front panel.
Powering OFF:
Press the “Power” button on the front panel of the DAC-10 / DAC-10 DSD.
When in use at home, there is no need to switch OFF the main switch on the rear panel – use
the back panel switch to completely power off the unit when leaving the house for longer
periods.
IMPORTANT:
Power ON the DAC-10 / DAC-10 DSD approx. 2 min. BEFORE switching ON your other audio
components such as amplifiers etc.
Make sure that the Volume control of your amplifier or pre-amplifier is close to minimum
position (volume turned down).
Switch your other audio components such as amplifiers OFF before turning OFF the DAC-10 /
DAC-10 DSD.
