vacuubrand MV 10C VARIO select, Инструкция по эксплуатации

Страница: 30 / 88

30 20901115_12+16C_VARIO_sel_V1.0_130618
Installation and connection
4.3 Controller base
The base, controller, screw fittings and vacuum sensor are en‑
closed separately. Before installation, the base can be mounted
on the pump and the controller clipped into place.
Alternatively, the controller can be clipped into a recess in the lab
furniture or used as a freestanding unit (unfold the stand).
Mount the base
1
Top
1
Top
2
1.
Unscrew the screws; Phillips
screwdriver size 1.
2.
Position the base on the dia‑
phragm pump.
3
4
3.
Screw the base onto the dia‑
phragm pump.
4.
Clip the controller into the
base.
5
6
5. Plug the VACUU·BUS cable
into the power connection on
the back of the controller.
6. Also plug in the VACUU·BUS
cables from peripheral devices.
Use Y adapters (accessories) if
there are not enough connec‑
tions.
Mount the base to
the diaphragm pump
(option)