vacuubrand ME 16C NT-ME 16C NT+EK, Инструкция по эксплуатации

Страница: 81 / 88

page 81 of 88
Repair - Maintenance - Return - Calibration
Every employer (user) is held responsible for the health and
safety of his employees. This also applies to service person-
nel performing repair, maintenance, return or calibration.
The health and safety clearance form informs the contractor about any
possible contamination of the device and forms the basis for the risk as-
sessment.
In case of devices which have been in contact with
biological substances of risk level 2 contact the
VACUUBRAND service absolutely before dispatching the device.
These devices have to be completely disassembled and decontami-
nated by the user prior to shipment. Do not return devices which
have been in contact biological substances of risk level 3 or 4.
These
devices cannot be checked, maintained or repaired. Also decontaminat-
ed devices must not returned to VACUUBRAND due to a residual risk.
The same conditions apply to on-site work.
No repair, maintenance, return or calibration is possible unless the
correctly completed health and safety clearance form is returned.
Devices sent are rejected if applicable. Send a completed copy of the
health and safety clearance form to us in advance. The declaration
must arrive before the equipment. Enclose a second completed copy
with the product.
Remove all components from the device that are no original VACU-
UBRAND components. VACUUBRAND will not be responsible for lost or
damaged components that are no original components.
Drain the device completely of fluids and residues. Decontaminate
the device. Close all openings airtight especially if using substances
hazardous to health.
To expedite repair and to reduce costs, please enclose a detailed de-
scription of the problem and the product’s operating conditions with every
product returned.
If you do not wish a repair on the basis of our quotation , the device may
be returned to you disassembled and at your expense.
In many cases, the components must be cleaned in the factory prior to
repair.
IMPORTANT