NOTE:
* Power unit must
be mounted at
least 6 inches from
sidewall
& floor. Leave
minimum of 12”
from ceiling or
shelving.
44” from floor
to top hole of
can bracket
44”
Hanger Bracket
Suggested
Guidelines
Typical Installation Design of Utility Vac
5
Strip the wire, press the Quick
Clips to the right and insert the
wire into the holes.
Low Voltage Wire Connections
To add additional utility valves (optional)
If plumbing in additional inlet valves, you
can use central vacuum tubing or Schedule
40 pipe. If using Schedule 40, you will need
to use reducer couplings when connecting
to inlet stem at the unit.
Inlet valve kits available. See page 10.
If you have questions, please contact us at
1-800-228-0285
and speak directly with the manufacturer.
Low Voltage Wiring to Inlets
