grounding cable shield
vacon • 9
24-hour s358 (0)40 837 1150 • Email: [email protected]
4
3.
Fix both the cables on the frame with the clamp. See Figure 4-5.
Figure 4-6.
4.3
Bus terminal resistors
Figure 4-8. Using jumper X4 to set the bus termination.
If Vacon is the last device of the fieldbus line the bus termination must be set. Use jumper X4 (ON
position). See Figure 4-7.
Note: Jumper X1 is only used when D9 type connector is assembled (Not used with BACnet protocol)
Fi
4 7
