Vacmaster CARDIO54 AM1202R, Руководство пользователя

Страница: 7 / 16

7
GB
OPERATION
1 Power Cord 8 Status Indicator Light
2 Carry Handle/Cord Storage 9 Mounting Pegs
3 Speed Control Knob 10 Intake Grill (Right)
4 Intake Grill (Left) 11 3-Position Anti-Skid Feet
5 Mounting Pegs 12 Remote Control
6 Air Discharge Grill 13 Remote Control Holder
7 On/Off Switch
1. Switching On/Off
1) Verify that the on/off switch is set to "0" OFF position. Connect the mains plug to a suitable
power outlet.
2) Press the on/off switch to "I" ON position.
3) When the speed control knob is positioned at either I, II or III, the air mover will begin to operate
at the desired speed. The indicator light on air mover will illuminate green.
4) To change to desired speed, switch the knob between the three positions.
5) When the speed control knob is located at
position, the remote control mode is engaged.
For remote control operation, refer to the Remote Control Mode section.
6) To switch off the air mover, press the on/off switch to "0" OFF position.
Position Status
I Low
II Medium
III Maximum
Remote Control Mode
UNPACKING AND CHECKING CARTON
CONTENTS
2. Remote Control Mode
NOTE : The remote control supplied with your air mover is already pre-set and does not require
pairing upon first use. The remote control can be used directly to operate the air mover in remote
control mode.
1) Switch the speed control knob to position (Fig. 1). Press the on/off switch on the air mover
to "I" ON position. The air mover is in standby mode. The indicator light will illuminate red.
2) Press button on the remote control to start the air mover. The air mover will automatically
start in the lowest speed setting. The indicator light on air mover will illuminate green. To