D
E
U
T
S
C
H
44
Getriebegehäuse
2º Abstandsring und
Schraube
1º Abstandsring
Wandhalterung
Tu
̈
rachse
Bolzen M10
Dehnungsbolzen
Splint
Deckel
Wasserfester Adapter
Motor
Bauteile Handkette
Einstellbarer Drehgriff
Endschalter
Klemmleiste de
Verkabelung
GRUNDAUFBAU
INSTALLATION
• Die Halterung (L-förmiger Anschlusswinkel aus Eisen) mit dem Dehnungsbolzen an der Wand festschrauben.
Die Wandhalterung kann links oder rechts vom Antrieb installiert werden.
• Den 1º Abstandsring in die Tu
̈
rachse einlegen.
• Den Antrieb in die Tu
̈
rachse einsetzen (die richtige Stellung des Splintes pru
̈
fen) und in der Wandhalterung festschrauben.
• Den 2º Abstandsring in die Tu
̈
rachse einsetzen und gegen den Antrieb dru
̈
cken, pru
̈
fen, ob die Handkette senkrecht nach unten fällt.
• Den 1º Abstandsring gegen den Antrieb dru
̈
cken und beide Ringe befestigen.