ENGLISH
2.0
Assemble fastening supports
E
: insert bolts
V2
and drill
plates
R
into the special section bar spaces, then adapt
such supports on the section bar with reference to the
bolts and close nuts
D1.
1.9
Insert the mechanic closing stop
T
, the draft truck
C
and
the mechanic opening stop
S
into the section bar guide
B.
WARNING:
we suggest to grease the sliding part of the draft
truck with spray grease usable also on plastic parts.
1.7
Insert the bolts
D5
into the special spaces of the
mechanic opening stop
S
and lightly fasten grub
screws
G1.
1.8
Insert the bolts
D5
into the special spaces of the
mechanic opening stop
T
and lightly fasten grub
screws
G1.
1.4
Insert tip
O
and bracket
N
into the special section bar
guides, then lightly fasten by means of the two screws
V3
and bolts
D3.
1.5
Insert the front fastening group
F
into the section bar
guide and bring it up to the ledge. Fasten the element
F
on the bracket
N
by means of the special adjustment
screw
V6.
Shut bolts and screws and check the firmness.
1.6
If you want to install the accessory
J5
kit for release from
outside, its metallic string needs to be inserted into the
special draft truck
C
hole before putting the truck into the
section bar.
22
