Installation instructions
Built-in variants of gas hob
Multi-sliders GAS411/421
1009436-R07
22/02/2018
1009436-R07
5
Electrical connection
Electrical connections must be carried out by qualified personnel in accordance with the guidelines and standards
for low-voltage installations and the specifications of the local electricity supply companies.
A plug-in appliance may only be connected to a socket outlet with earthing contact, installed according to specifications. An
all-pole mains isolating device with 3 mm contact opening should be provided in the house wiring system. Switches, plug and
socket devices, circuit breakers and fusible cut-outs which are accessible after installation and which have all-poles switching
are permissible as isolating devices. Effective earthing and separately installed neutral and earth conductors ensure safe and
fault-free operation. After installation, live parts and cables with basic insulation must not be accessible. Check old installa-
tions.
▸
Refer to the identification plate for information on the required mains voltage, current type and fuse protection.
The connection cable has either a plug or three stranded wires.
Plug-in appliances must be connected to an easily accessible power socket.
Appliances with stranded wires must be connected by a qualified electrician via a junction box according to local regulations.
Installation pipe
Distribution box
Clamp
The mains plug must not be cut off.
Error message U400
Incorrect connection:
Pole conductor connected to connection terminal for neutral conductor or voltage too high.
▸
Quickly disconnect the appliance from the mains!
Ventilation
In order to guarantee minimum ventilation, a space of ≥20 mm height is ne-
cessary beneath the appliance.
≥15
B
A
A
The rear panel of the base unit must be open around the work surface
cut-out to guarantee continuous air circulation via the ventilation slits.
The air must be drawn in from outside the cabinet and be able to circu-
late freely from inside the cabinet to the hob.
B
Alternatively, a concealed fresh air supply can ensure air circulation in-
side the cabinet.
So that enough cold air can be drawn in, there must be a continuous
supply of fresh air circulating till outside the cabinet.
The air must be drawn in from outside the cabinet and be able to circu-
late freely from inside the cabinet to the hob.
