![background image](http://html1.mh-extra.com/html/v-zug/combair-v4000-60/combair-v4000-60_operating-instructions-manual_3280377048.webp)
8 Care and maintenance
8.4
Pyrolytic self-cleaning
Risk of burns from hot surfaces!
The appliance front gets hotter than during normal operation. There is likely to be
some smoke given off for a short period of time so ventilate the room during pyro-
lysis. Do not leave the appliance unattended.
Roughly remove grease and oil deposits and baked-on deposits beforehand. Do
not use any chemical cleaning agents. Residues of cleaning agents can cause
chemical reactions, destroy the enamel and give off poisonous fumes.
In pyrolytic self-cleaning, any soiling is burned off at a high temperature. Afterwards the
deposits can easily be removed with a damp cloth. Over time with use the cooking
space can turn matt. Fruit acid and fatty acid deposits can leave stains. This will not af-
fect the cooking or baking characteristics of the appliance nor affect its functioning.
Pyrolytic self-cleaning – including cooling down – takes 3–5 hours depending on
the degree of soiling.
As long as the temperature is over 300 °C, the illumination and the heatable appli-
ance drawer turn off and cannot be turned back on.
Selecting and starting pyrolytic self-cleaning
Damage to accessories from self-cleaning!
Remove accessories, shelf guides, fully extending runners, cookware and any
other objects from out of the cooking space. Otherwise they can become discol-
oured and their surface rough. The rolling properties of full extension roller runners
deteriorate.
▸ Close the appliance door.
▸ Long touch the display.
▸ Select the application.
▸ Select the degree of soiling.
–
The calculated end time for pyrolytic self-cleaning is shown in the display.
▸ Touch «Start» to start pyrolytic self-cleaning.
–
The appliance door locks.
Delayed start
The start of pyrolytic self-cleaning can be delayed, for example, to take advantage of
lower electricity tariffs.
▸ Select before starting.
▸ Set the desired end time.
▸ Touch «Start».
–
The appliance remains switched off and the appliance door locked until the calcu-
lated automatic start.
Cancelling
▸ Touch «Stop» in the display.
–
Pyrolytic self-cleaning is cancelled.
–
The following appears in the display: «Residual heat in the appliance».
–
The appliance door remains locked until the temperature drops below 300 °C.
48