![background image](http://html.mh-extra.com/html/v-zug/173/173_installation-instructions-manual_846555004.webp)
Installation instructions
Heat pump dryer
Multi-family building
J173.113-0
6.4.11 ITH
4
1. Roughly level the appliance using the rear adjustable feet. Set the adjustable feet using counter nuts.
2. To ensure smooth, fault-free operation, the appliance must be perfectly vertical. Use a spirit level to position the appliance.
3. Place the appliance on the installation plate and push it as far as it will go.
4. Level the front adjuster feet until all 4 feet are standing firmly on the floor.
– The appliance must not wobble.
5. Set the adjustable feet using counter nuts.
Washer-dryer tower
1. Roughly level the dryer using the rear adjustable feet. Set the adjustable
feet using counter nuts.
2. Place the dryer on the installation plate
D
and push it as far as it will go.
3. Level the front adjuster feet until the dryer is standing firmly on the floor.
– The dryer must not wobble.
4. To ensure smooth, fault-free operation, the dryer must be perfectly
vertical. Use a spirit level
E
to position the dryer.
5. Affix 4 anti-tipping attachments
F
(see picture below).
6. If required, attach plinth
G
(W5.0488 set) according to separate
instructions.
2. Levelling
Wet the gliding track with water before pushing the appliance in. This makes it easier to slide the appliance in.
In the case of a washer-dryer tower combination, the 4 anti-tipping devices from the operating set must be mounted.
E
G
D
F
F
D
2.
1.