38
USI
n
G
t
H
e
D
oo
R
bell
-oR-
Press
/VIeW
when the handset is not in use
note
If you have more than one doorbell, press
p q
to scroll to the desired doorbell and then press
Select
.
-oR-
Press
/VIeW
during a call. The call is put on hold and other system handsets display
line on
hold
. You hear a beep every 10 seconds.
noteS
If you do not connect the doorbell to AC power, you can only start a video streaming session with
the doorbell instead of a handset. The handset displays
to view video from doorbell, please use
Ac power mode.
, and you hear an error tone.
If you do not press the flashing
SPeAK
during the video streaming, the session ends in 2 minutes.
options while video streaming:
Press the flashing
SPeAK
to talk to the visitor.
Press
SnAPSHot
to take a photo shot of the visitor.
Press
ISo
, then press
+
or
-
to adjust the video stream brightness.
note
After you press
SPeAK
to start a conversation with the visitor, the video/audio streaming session ends
in 45 seconds if it is initiated by the doorbell or 60 seconds if initiated by the handset.
5.3 extend a Video Streaming Session
The video/audio streaming session ends in 45 seconds if it is initiated by the doorbell or 60 seconds
if initiated by the handset. When the screen displays
Session is ending... Press [VIeW] to extend.
and
/VIeW
flashes, you have five seconds to extend the video session,
Press
/VIeW
to extend the video session.
If you did not press
SPeAK
during the video session, the video streaming extends for 30 seconds
if it is initiated by the doorbell, or for 120 seconds if initiated by the handset.
If you pressed
SPeAK
during the video session, the video streaming extends for 45 seconds if it
is initiated by the doorbell, or for 60 seconds if initiated by the handset.
•
•
•
•
•
•
•
•
•
•
