S
et
UP
t
H
e
tele
PH
o
ne
11
2.8 locating the Doorbell
Before mounting the doorbell on a wall, make sure you test if the location you install the doorbell is in
range, and adjust the camera angle to best suit your needs.
to test the location for installation:
Hold the doorbell in the location where you want to install the doorbell, then follow the steps below to
test the reception range and video capture angle.
Press
MenU
>> Press
p q
to
Settings
>> Press
Select
.
Press
p q
to
Doorbell setup
>> Press
Select
.
Press
/DooRbell
to check the video streaming quality.
The handset displays
the handset is muted during the setup mode
, then press
oK
.
Press
ISo
, then press
+
or
-
to adjust the video streaming brightness.
If audio feedback occurs, press on the handset to turn off the speakerphone.
If the desired location is in good range, the handset displays
.
If the desired location is not in good range, the handset flashes
in red. Press
Info
for
instructions to relocate your handset and/or telephone base. When the reception is in good
range, the handset displays
. Press
oK
to return to the video streaming.
1.
2.
3.
4.
5.
•
•
•
