V-tech DT601/FP, Руководство пользователя

Страница: 13 / 20

-12-
1)Power-on within 10 seconds;
2)Press and hold "KEY1" button for
3 seconds;
3)It will enter the state of update
[Management Fingerprint] setting
.
LED 1 LED 2 Buzzer
beep+,beep
(red) (off)
Touch original [Management
Fingerprint], make
[Management
Fingerprint]
change confirmed;
LED 1 LED 2 Buzzer
beep+,beep (off)
6.2 Update [Management fingerprint]
When the system has been registered [Management Fingerprint],
you can according to the following operation to register new
[Management Fingerprint].
Success: (off)
LED 1 LED 2 Buzzer
beep,beep,beep
( red,
flash 3 times)
(off) Failure:
(red)
Touch new [Management
Fingerprint], get on the first time
identified.
LED 1 LED 2 Buzzer
beep+,beep
( green,
flash 3 times)
(off) Success:
(blue)
LED 1 LED 2 Buzzer
beep,beep,beep
( red,
flash 3 times)
(off) Failure:
(off)
Touch new [Management
Fingerprint], get on the second
time identified.
LED 1 LED 2 Buzzer
beep+
( green,
flash 3 times)
(on) Success:
(red)
LED 1 LED 2 Buzzer
beep,beep,beep
( red,
flash 3 times)
(off) Failure:
(off)
Note:
1)In the second identified,when it succeeded, the system will exit the setting, then
return to the standby state; When it failed, the system will return to the operation of
first identified.
2)In all steps, if there isn’t any operation within 10s, or press Call button, it will exit
the setting, and the color of LED1 turns to red, and the buzzer sounds "beep, beep+".