-11-
6. Register [Management Fingerprint]
[Management Fingerprint] will serve as a registered or delete
credential of user fingerprint. The system can only store a
management fingerprint.
1)Power-on within 10 seconds;
2)Press and hold "KEY1" button for
3 seconds;
3)It will enter the state of registered
[Management Fingerprint] setting
.
LED 1 LED 2 Buzzer
beep+,beep
(off)
(off)
6.1 Register [Management Fingerprint]
When the system has never been registered [Management
Fingerprint], you can according to the following operation to
register [Management Fingerprint].
Touch finger in the fingerprint
window, get on the first time
identified;
LED 1 LED 2 Buzzer
beep+,beep
( green,
flash 3 times)
(off)
Success:
(blue)
LED 1 LED 2 Buzzer
beep,beep,beep
( red,
flash 3 times)
(off)
Failure:
(off)
Touch finger in the fingerprint
window, get on the second time
identified.
LED 1 LED 2 Buzzer
beep+
( green,
flash 3 times)
(on)
Success:
(red)
LED 1 LED 2 Buzzer
beep,beep,beep
( red,
flash 3 times)
(off)
Failure:
(off)
Note: 1)In the second identified,
when it succeeded, the system will
exit the setting, then return to the
standby state; When it failed, the
system will return to the operation
of first identified.
2)In all steps, if there isn’t any
operation within 10s, or press Call
button, it will exit the setting, and
the color of LED1 turns to red, and
the buzzer sounds "beep, beep+".
