-9-
1)Power-on within 10 seconds;
2)Press and hold "KEY2" button
for 3 seconds, it will enter the
setting state of prepare.
LED 1 Buzzer
beep+,beep
(red,flash)
Press and hold "KEY1" button for
3 seconds, it will enter the state
of unlock time setting.
LED 1 Buzzer
beep+,beep
(off)
At this time press and hold
"KEY2" button,timing starts;
release "KEY2" button to end
the timing. The time of press
and hold "KEY2" button equal to
unlock time.(Timing Unit: 1s)
LED 1 Buzzer
beep once
per second
(green,
flash once
per second)
5.2 Unlock Time Settings
The unlock time can be set to 1~30 seconds. The default is 1s.
Note: In all steps, if there isn’t any operation within 10s, or press Call button, it will exit
the setting, and the color of LED1 turns to red, and the buzzer sounds "beep, beep+".
