V-fit DS 2669-UK, Сборка и руководство пользователя

Страница: 20 / 28

Assembly
For your convenience, the Velcro style adjustable Footplate Straps
(16) are pre-fitted to the Footplates (15) in the lower of the 2
positioning options. Slide the Footplate Crossbar (17) into the Main
Frame and then slide a Footplate Crossbar Spacer (18) onto each end
of the bar, followed by a Footplate, securing in place with 2 x M10
Large OD Flat Washers (51) and 2 x M10 Nylon Locknuts (47).
8
51
47
16
15
18
18
15
51 47
16
Slide the assembled Seat Carriage (9) onto the Rowing Rail (2)
from the back and fit a Seat Carriage Stop Assembly (11) to each
side of the Rail with the 2 x M8 Small OD Flat Washers (48) and
2 x M8 Plain Nuts (44) which should be fitted on the inside of the
rail. Cap the end with the Rowing Rail End Cap (13).
7
Compliance to BS EN 957
requires that an additional /
alternative seat stop to be fitted.
If desired, please fit the 1 x M8 x
20mm Hex Bolt (40) and 1 x M8
Large OD Flat Washer (49) in the
hole on the top of the Rowing Rail
and secure in place from the
underside using 1 x M8 Plain Nut
(44). A hard rubber buffer is
pre-fitted to the underside of the
Seat Carriage (9) to act as a stop.
Note
62
49
40
9
2
13
11
44
44
11
44 48
48
Page 20