V-fit DS 2669-UK, Сборка и руководство пользователя

Страница: 21 / 28

Assembly
10
FULLY TIGHTEN all Bolts, Nuts
and Fittings now, ensuring that
your Air Rower in located on a
clear flat surface before doing so.
Your Air Rower will now be ready
to use.
Note
1. Remove the Lock Pin (52) from the Main Frame and retain for
future use to lock the drive if needed for maintenance or
transportation. DO NOT refit when in regular use.
2. Carefully pull the Row Bar (24) back and set it in its rest position
on top of the Exercise Monitor Console (20).
19
20
21
23
Fit 2 x AA Batteries (not supplied) to the battery carrier in the Exercise
Monitor (19) then connect the Air Fan Sensor Cable (23) to the MALE
plug in the rear of the Monitor and the Exercise Monitor Link Cable (21)
to the FEMALE plug ensuring that the contacts are pushed fully home.
(You will hear / feel 2 clicks indicating that correct contact has been
made). Guide the spare length of the Air Fan Sensor Cable into the
exit cutout in the Main Frame then carefully push the complete
Exercise Monitor (19) into place in the top of the Monitor Console
(20).
9
19
21
23
24
1.
52
2.
Page 21