8
81-0220-01 Rev R
3.2
Safety Instructions
– Operation and Maintenance
The system is designed for function, reliability, and safety. The unit may include shortwave
UV, which is a powerful source of UV radiation that will cause damage to unprotected eyes
and skin.
For your own safety observe the following notes:
The device must only be operated if all protective equipment is present, and the system
is properly installed and fully functional.
Free access to the power plug and main power switch on the back of the unit must be
ensured.
Disconnect the power supply before servicing the system
For UV protection and to extend the life of the UV transilluminator, the system
incorporates a customizable transilluminator shutoff timer built into the software. For
additional information, refer to Section 4.4.
Caution:
Do not override the UV safety switch located on the darkroom without the use of
protective equipment and face shields.
Caution:
Shortwave UV (254 nm) is a powerful source of UV radiation that will cause
damage to unprotected eyes and skin. Before operating any unit, ensure all personnel in
the area are properly protected and that instructions for use of this equipment are followed.
