UVP ChemiDoc-It TS3, Инструкция по установке и эксплуатации

Страница: 9 / 41

GelDoc-It
TS3
and ChemiDoc-It
TS3
Imagers 9
81-0360-01 Rev B
Fluorescent Focus Target
VisionWorks touch software
Fold down tray
3.6 Fold Down Tray for Blots
The ChemiDoc-It
TS3
Imager is equipped with a fold down
tray located inside the darkroom. The tray folds down and
can slide up and down for multiple levels of placement.
3.7 Transilluminator
The GelDoc-It
TS3
and ChemiDoc-It
TS3
Imagers
can accommodate UVP’s Benchtop and FirstLight
®
transilluminator models. UVP offers a variety of transilluminator configurations, including
Benchtop models with multiple wavelengths and variable intensities, as well as the highly uniform,
patented FirstLight transilluminator.
Note : For UV protection and to extend the life of the UV transilluminator, the system
incorporates a customizable transilluminator shutoff timer built into the software. For
additional information, refer to the
Lighting section of this manual.
3.8 LCD Touch Screen
The GelDoc-It
TS3
and ChemiDoc-It
TS3
Imagers contain a fully integrated 15.6-inch color touch
screen computer. The touch screen allows the user to perform a variety of tasks, including
previewing, capturing, saving and printing images, as well as selecting preference options,
without the use of an external mouse or keyboard. The screen can be pressed by finger or with
the included stylus.
For users who prefer not to use the touch screen interface, an external keyboard and mouse are
included as standard. These components can be plugged into any available system USB ports.
3.9 VisionWorks touch
Image acquisition and hardware functions for the GelDoc-
It
TS3
and ChemiDoc-It
TS3
Imagers are controlled by using
the VisionWorks touch software interface. In addition to
image preview, capture and save functions, VisionWorks
touch controls camera and lens functions (exposure,
aperture, focus and zoom, where applicable), image
printing, lighting and filter selection, and other user
settings.
3.10 Fluorescent Focus Target
The UVP Fluorescent Focus Target fluoresces when
placed on a UV transilluminator or when exposed to
overhead UV. The Target provides sharp fluorescent
images to aid in adjusting the lens and camera settings for
ideal imaging results.