UV
222
Industrial
Technical & Installation Manual
18
7. PRODUCT FAILURE
FAILURE
TO DO
Unit does not light up
Check incoming power.
Check cable damage.
Check if the Product is correctly installed.
Unit flickers
Check if the Product is correctly installed.
If not, contact your local distributor.
White flash
Power cycle the unit.
Does not hold settings
Replace battery.
If the failure is unsolved or recurring, please return the unit to an official UV Medico dealer/
service centre for repair or replacement (see point
10. REPAIRS
).
8. CLEANING AND MAINTENANCE
Clean the external surfaces with a soft cloth and non-aggressive cleaning agents only.
Before performing any maintenance always unplug the Product and disconnect the power
supply.
CAUTION:
Turn off and lock out ALL unit power before
performing any cleaning. Do not wash the Product by
immersion.
