background image

11

6.5. Understanding the unit’s operation

The maximum permissible UV-C exposure shall not exceed the ACGIH TLV and NIOSH REL 

of 22.0 mJ/cm² for an 8 h day, 40 h work week exposure to UV radiation at 222 nm.

(UV Medico A/S expects positive changes into the ACGIH that will result in a higher expo

-

sure than allowed at this moment. If this changes, UV Medico A/S will update the software 

of the unit to align with the new threshold of exposure). 

To achieve the correct radiation within these limits, following information will be 

 

programmed into the Product before the beginning of this installation.

6.6. Setting up the Product

The installer will need a Microsoft Windows computer with the UV Medico application 

installed. Contact your distributor to get access to the latest software and firmware for the 

Product. 

To launch the app, go to the installed folder and open the file:

UV Medico Configuration App.exe

The app includes two different set up modes: simple and advanced. 

For the simple mode, follow the instructions that will appear on the screen. 

For the advanced mode, see below:

Remove the cap on the bottom of the unit 
to access the USB-C connection 

D

 and 

connect to a computer with a USB cable. 

When you connect your computer to the 

unit, it will show up automatically on the 

application.

Once the app is launched, follow the next 

steps:

D

Содержание UV222





















Отзывы: