UTStarcom iSpirit 3026, Руководство пользователя

Страница: 197 / 240

Figure 18-17 Current VLAN Configuration Page
(2) Static VLAN configuration page
Figure 18-18 shows static VLAN configuration page which allow user to set up a VLAN and
configure a VLAN port member, consists of two parts: active line and list box. Active line is on the
first line which is programmable; list box under the active line contains a series of static LVAN
with VID and VLSN name.
If you want to set up a new VLAN, you should input VIC, VLAN name and Port list message into
the active line, then press APPLY or SAVE key, the VID & VLAN name of VLAN set up by user
can be displayed in the list box.
If you want to amend an exist VLAN, you should click relevant VLAN in the list box which will be
displayed in the active line
，
after that you should press APPLY or SAVE key
If you want to delete a VLAN, you can click relevant VLAN in list box which will be displayed in
the active line, then press Delete key to delete the VLAN and the message in the VLAN will be
deleted at the same time.
iSpirit3026 switch support 4094 VLAN at most. A port may not be a member of VLAN, but it may
be VLAN tagged member or untagged member. When you amend VLAN port list, you should
click mouse at each port; switch can be perform between U and M. Meaning of characters on the
port of page is as described in Table 18-4