UTStarcom iSpirit 3026, Руководство пользователя

Страница: 135 / 240

Figure 12-9. DSCP-QUEUE Mapping Table Default Value
2. Configure QoS Mapping Table
Configuration showing commands of all QoS Mapping Table are under CLI global input.
●
Following two commands are used for configuring and showing COS-DSCP Mapping
Table
：
qos cos-dscp <cos-value> <internal-dscp-value>
show qos cos-dscp
For example map COS value of “0” into internal DSCP value of “40”
：
Switch# qos cos-dscp 0 40
Switch# show qos cos-dscp
●
Following two commands are used for configuring and showing PREC-DSCP Mapping
Table
：
qos prec-dscp <ip-precendence-value> <internal-dscp-value>
show qos prec-dscp
For example map IP Precedence value of “0” into internal DSCP value of “40”
：
Switch# qos prec-dscp 0 40
Switch# show qos prec-dscp
●
Following two commands are used for configuring and showing DSCP-DSCP Mapping
Table
：
qos dscp-dscp <dscp-value> <internal-dscp-value>
show qos dscp-dscp
For example map DSCP value of “0” into internal DSCP value of “40”
：
Switch# qos dscp-dscp 0 40
Switch# show qos dscp-dscp
●
Following two commands are used for configuring and showing DSCP-QUEUE
Mapping Table
：
qos interdscp-queue <internal-dscp-value> <queue-id>
show qos interdscp-queue
For example map internal DSCP value of “40” into queue 2
：
Switch# qos interdscp-queue 40 2
Switch# show qos interdscp-queue
Notes:
Mapping Table
Mapping Table Configuration is only valid for QoS started in succeeding port, for the port started