1.3
95-8574
10
DETECTION/RELEASING SYSTEM "FM"
CADDS NAME: 6838-01d
A/B
006838-001
DWG, DESIGN REFERENCE FLAME
1 OF
1
NEW RELEASE
8/24/01
CDS
5889-
2
NTS
D
1. FM APPROVED DRAWING - NO MODIFICATIONS PERMITTED WITHOUT REFERENCE TO FM APPROVALS.
X5200 UVIR FLAME DETECTOR
FDRS-FM-PE
INPUT TO R7404B CONTROLLER (X5200 PULSE OUTPUT):
AC POWER
(REF MANUAL)
FLAME DETECTION/RELEASING SYSTEM (FDRS)
INCLUDES:
R7404/R7494 CONTROLLER (QTY 4 MAX)
TERMINAL STRIP
Q4004 MOUNTING RACK
APPROVED FOR USE WITH THE FOLLOWING SOLENOID VALVES:
(ANSI/NFPA 72-1999)
OF EXTINGUISHING SYSTEM PANEL.
BATTERY BACK-UP
90 HOUR BATTERY
(REFERENCE MANUAL FOR
WET CELL BATTERY TYPES MUST BE WITHIN VENTED ENCLOSURES.
SEALED BATTERY TYPES DO NOT REQUIRE VENTED ENCLOSURES.
R6006 RELAY MODULE (QTY 1 MAX)
R1425 DETONATOR MODULE (QTY 1 MAX)
INPUT TO R1425 DETONATOR MODULE
INTENDED FOR USE WITH COMPATIBLE
FM APPROVED DEVICES (e.g. KIDDE DUAL SPECTRUM PM-5MPX)
BACK-UP CALCULATIONS)
MODEL A12(A36)-10A-24V-A1
BATTERY CHARGER
LaMARCHE POWER SUPPLY
/
RELEASING/DELUGE
CIRCUITS PER NFPA 72
20VDC MIN.
CONTACT RATING: 12 AMPS PEAK (10mSEC),
THE PRIMARY & SECONDARY POWER SUPPLY EQUIPMENT & CONTROLLERS MUST BE LOCATED
WITHIN 20ft (6M) OF THE FLAME DETECTION/RELEASING SYSTEM WHERE THE CONDUCTORS ARE
INSTALLED IN CONDUIT OR EQUIVALENTLY PROTECTED AGAINST MECHANICAL DAMAGE.
3
2. DESIGN REFERENCE DRAWINGS:
X2200 UV FLAME DETECTOR: 007399-001
Q4004 MOUNTING RACK: 006843-001
R7404/R7494 CONTROLLER: 006840-001
R6006 RELAY MODULE: 006841-001
R1425 DETONATOR MODULE: 006842-001
DELUGE:
RELEASING:
SUITABLE FOR INTENDED USE
R1425 OUTPUT SPECIFICATIONS
FAILURE RELAY
AC POWER
W2400 GRUND FAULT MONITOR MODULE (QTY 1 MAX)
W2400 GROUND FAULT MONITOR MODULE: 006848-001
LOW/HIGH DC VOLTAGE ALARM FAILURE RELAY
FLAME DETECTOR "B" LEAD & "D" LEAD CIRCUIT CONFIGURATION:
SPRINKLER SYSTEM OR AUTOMATIC RELEASE
FM APPROVED
AUTOMATIC RELEASE OF PREACTION & DELUGE
DWG NO
SH
REV
8
D
C
B
A
D
C
B
A
8
7
7
6
6
5
5
4
4
3
3
2
1
1
D
THEREOF IS EXPRESSLY PROHIBITED WITHOUT THE WRITTEN
UNLESS OTHERWISE SPECIFIED
DIMENSION TOLERANCE
INCH (MM) INCH (MM)
REMOVE ALL BURRS BREAK ALL
EDGES AND SHARP CORNERS
THIS DRAWING AND SPECIFICATION CONTAIN PROPRIETARY
INFORMATION AND ANY REPRODUCTION DISCLOSURE OR USE
PERMISSION OF DETECTOR ELECTRONICS CORPORATION.
0.0
(0)
±
.0
2
FIRST USED ON
BILL OF MAT'L REQ.
TITLE
SHEE
T
APP'
D
APP'
D
DO NOT SCALE DRAWING
DATE
DATE
ANGLE
±
1'
(0.0
)
(0.00)
0.00
0.000
±
.0
1
±
.005
CHECKE
D
DRAWN
REV
DATE
DAT
E
ECO NO
.
TOLERANCES ARE
:
DESCRIPTION
DETECTOR ELECTRONICS CORP
.
±
(0.5)
SIZE
SCALE
DRAWING NO
.
MINNEAPOLIS, MINNESOTA 5543
8
±
(0.25)
±
(0.13
)
REV
APPROVE
D
DATE
BATTERY FAILURE DETR. CLARIFY
6458
C
X9800 IR FLAME DETECTOR: 007399-001
OR
FAILURE
RELAY
BATTERY FAILURE DETECTOR
ANSI/NFPA 72: 1999, CL 1-5.8
X2200 UV FLAME DETECTOR
(BFD)
3
3
4
4
3
MODEL M-4193-24G
MULTITEL
SUPERVISORY POWER ALARM/TROUBLE
SIGNALS TO PANEL FOR NOTIFICATION
9/5/97
MWM
OPTIONAL SUPERVISORY BATT. MONITOR.
DIV 2, GRP A,B,C,D (T3C);
DIV 1, GRP E,F,G; CL III;
DIV 2, GRP F&G (T3C). NEMA/TYPE 4X
DIV 1, GRP B,C,D;
CL I,
CL II,
CL I,
CL II,
X3301 IR FLAME DETECTOR
CL II/III DIV.2 GRP F & G (T3)
CL I DIV.2 GRP A,B,C & D (T3)
CL II/III DIV.1 GRP E,F & G (T5)
CL I DIV.1 GRP B,C & D (T5)
NEMA/TYPE 4X
(QTY 8 MAX PER CONTROLLER)
INPUT TO R7404B CONTROLLER (X9800 PULSE OUTPUT):
INPUT TO R7404B CONTROLLER (X3301 PULSE OUTPUT):
X5200 UVIR FLAME DETECTOR: 007399-001
X3301 IR FLAME DETECTOR: 007264-001
MODEL A36-30A-24V-ABD1
OR
MODEL A36-75A-24V-ABD1
OUTPUT FROM:
R1425
R6006
OUTPUT FROM:
4 AMPS CONTINUOUS
FOR SOLENOID OR SQUIB:
DC SOLENOID RATING: 4 AMPS @ 50VDC MAX.,
5
ADD 30A & 75A POWER SUPPLY, C7051, X3300, X3301,
&
5
5
5
5
EXPLOSIONPROOF FOR USE IN
EXPLOSIONPROOF FOR USE IN
R1 & R2 RESISTOR DIVIDER NETWORK, 10KOHM, 1/2W, 5% EACH.
6
6
R1
R2
POWER SUPPLY
CIRCUITS PER
SUPERVISORY
ELECTRONIC CURRENT
SIGNAL
PER NFPA 72
PER NFPA 72
CIRCUITS PER
POWER SUPPLY
ENCLOSURE MUST BE
ALARM/TROUBLE
1/4/02
CDS
7133
D
NEMA/TYPE 4X
CL II/III DIV.1 GRP E,F & G (T5)
CL I DIV.1 GRP B,C & D (T5)
CL II/III DIV.2 GRP F & G (T3)
CL I DIV.2 GRP A,B,C & D (T3)
EXPLOSIONPROOF FOR USE IN
NEMA/TYPE 4X
CL II/III DIV.1 GRP E,F & G (T5)
CL I DIV.1 GRP B,C & D (T5)
CL II/III DIV.2 GRP F & G (T3)
CL I DIV.2 GRP A,B,C & D (T3)
EXPLOSIONPROOF FOR USE IN
SINGLE DETECTOR CONFIGURATION: EQUIVALENT TO ANSI/NFPA 72 CLASS B, STYLE A INITIATING DEVICE CIRCUIT (IDC).
REDUNDANT DETECTOR CONFIGURATION: EQUIVALENT TO ANSI/NFPA 72 CLASS A, STYLE D INITIATING DEVICE CIRCUIT (IDC).
X9800 IR FLAME DETECTOR
(QTY 8 MAX PER CONTROLLER)
(QTY 8 MAX PER CONTROLLER)
(QTY 8 MAX PER CONTROLLER)
GROUP E: SKINNER 73218BN4UNLVNOC111C2,
REMOVE X3300 & C7050/7051. ADD
NFP DETECTORS. UPDATE NOTE 5.
INPUT TO R7404B CONTROLLER (X2200 PULSE OUTPUT):
ANSI/NFPA 72: 1999, CL 1-5.8
ANSI/NFPA 72: 1999, CL 1-5.8
ANSI/NFPA 72: 1999, CL 1-5.8
INITIATING DEVICE CIRCUITS (IDC)
CLASS A, STYLE D PER ANSI/NFPA 72
CLASS A, STYLE D PER ANSI/NFPA 72
INITIATING DEVICE CIRCUITS (IDC)
24VDC, 10W, 5/8" ORIFICE, 5-175 P.S.I.
F
ig
ur
e 5
—
F
la
m
e D
et
ec
tio
n
/R
el
ea
si
ng S
ys
te
m – B
lo
ck D
ia
gr
am
