1.3
95-8574
9
4. Loosen the captive screw at the bottom of the front
panel of the module and slide it out of the mounting
rack.
5. Return to the factory for repair as instructed in the
“Repair and Return” section of this manual. Replace
with a serviceable controller.
NOTe
When replacing a controller, be sure that the
rocker switches of the replacement are the same
as the original.
DEvICE REPAIR AND RETURN
Prior to returning devices or components, contact
the nearest local Detector Electronics office so that
an RMI (Return Material Identification) number can
be assigned. A written statement describing the
malfunction must accompany the returned device or
component to expedite finding the cause of the failure,
thereby reducing the time and cost of the repair. Pack
the controller circuit boards using sufficient packing
material in addition to an anti-static bag or aluminum-
backed cardboard as protection from antistatic
discharge.
Return all equipment transportation prepaid to the
Minneapolis location.
ORDERING INFORMATION
For assistance in ordering, please contact:
Detector Electronics Corporation
6901 West 110th Street
Minneapolis, Minnesota 55438 USA
Operator: (952) 941-5665 or (800) 765-FIRE
Customer Service: (952) 946-6491
Fax: (952) 829-8750
Web site: www.det-tronics.com
E-mail: [email protected]
