2NM/2NX/2NY/2NZ/2P0/2P6
1-4-26
1820
Paper feeder 3 communica-
tion error
A communication error from
paper feeder is detected 10
times in succession.
Paper feeder
Check the wiring connection status with
paper feeder unit 2 and, if necessary, try
connecting it again.
PF main PWB
1. Confirm that the wiring connector is
firmly connected and, if necessary,
connect the connector all the way in.
PF main PWB (YC1) and PF main PWB
(YC22).
2. If the wiring is disconnected, shorted or
grounded, replace the wiring.
3. Replace the PF main PWB.
Control PWB
1. Check the control software and upgrade
to the latest, if necessary.
2. Replace the control PWB and check for
correct operation (see page 2-2-12).
1830
Paper feeder 4 communica-
tion error
A communication error from
paper feeder is detected 10
times in succession.
Paper feeder
Check the wiring connection status with
paper feeder unit 3 and, if necessary, try
connecting it again.
PF main PWB
1. Confirm that the wiring connector is
firmly connected and, if necessary,
connect the connector all the way in.
PF main PWB (YC1) and PF main PWB
(YC22).
2. If the wiring is disconnected, shorted or
grounded, replace the wiring.
3. Replace the PF main PWB.
Control PWB
1. Check the control software and upgrade
to the latest, if necessary.
2. Replace the control PWB and check for
correct operation (see page 2-2-12).
1900
Paper feeder 1 EEPROM
error
When writing the data, read
and write data does not match
4 times in succession.
PF main PWB
(EEPROM)
1. Confirm that the wiring connector is
firmly connected and, if necessary,
connect the connector all the way in.
2. Replace the PF main PWB.
1910
Paper feeder 2 EEPROM
error
When writing the data, read
and write data does not match
4 times in succession.
PF main PWB
(EEPROM)
1. Confirm that the wiring connector is
firmly connected and, if necessary,
connect the connector all the way
in.Replace the PF main PWB.
1920
Paper feeder 3 EEPROM
error
When writing the data, read
and write data does not match
4 times in succession.
PF main PWB
(EEPROM)
1. Confirm that the wiring connector is
firmly connected and, if necessary,
connect the connector all the way in.
2. Replace the PF main PWB.
Code
Contents
Related parts
Check procedures/
corrective measures
Содержание P-4030 MFP
