Utax AK 740 Скачать руководство пользователя страница 54

Страница: 54 / 207

3N0/3NK/3PD/3PG

1-4-9

Conveying

guide,

approaching

guide, feed-

shift guide

1. Check that the foreign

objects including scrips,

paper clips, etc., do not exist

in the paper conveying paths.

If foreign objects such as scrips, etc., remain in the

paper conveying path, remove.

2. Check that the paper

conveying guide and the

separation needles are not

contaminated with toner,

paper dusts, etc.

If dirty, clean the guide, ribs (by a cloth), and the

separation needles (by a cleaning brush).If the ribs of

the conveying guides were broken or deposited with

toner, replace.

3. Check that the paper

conveying guide has no

barrs, deformations, or

abrasions; and it is properly

mounted without being

floated.

Clean the conveying guide or the paper approaching
guide.Remove any protrusions including barrs.If floated,
fix it properly.If deformation or abrasion is observed,
replace.

4. Check that the guide.

Check that the guide is
smoothly operative when
manipulated.

If the guide is inoperative or won't operate smoothly,

replace the guide or the unit.

5. Check that the guide.

Perform U033 to check the

operation of the solenoid to

sight-check or audio-check its

action.

If the guide is inoperative or won't operate smoothly, re-

assemble the guide or replace the solenoid or the unit.

Check items

Check description

Corrective measures

Содержание AK 740
















































































































































































































Результаты поиска

Содержание AK 740

Отзывы:

Бренды по названию

Популярные бренды

Utax AK 740, Руководство по обслуживанию

Результаты поиска

Содержание AK 740

Отзывы:

Бренды по названию

Популярные бренды