Utah Sandar UTAH-100, Руководство пользователя и инструкция по установке

Страница: 75 / 80

User Manual & Installation Guide
UTAH-100 Control Software
Document: UTAH-100-ControlSoftware10.doc
Date: 2009-11-10, Rev. 1.0
10
Partition and Levels
On this page you set the level of the device. This is the INP level and the router status will follow
this level, independent on where the changes (takes) are performed.
Also on this page is the possibility of doing a simple matrix partitioning (only available on routers
and with more than one stand-alone destination). This is achieved by dividing the matrix in the
middle into two logical devices; A and B. Examples:
No Partition Partitioned
Logical device A Logical device B
16x16 Audio Stereo Router 16x16 (Mono) 16x16 (Mono)
16x16 Video Router 8x8 8x8
32x4 Video Router 16x2 16x2
Two methods of control are available when the device is partitioned; married or stand-alone. If
married is chosen, A is controllable while B mirrors A. The Control page will show one matrix. If
stand-alone is chosen, the two logical devices operates independently at two different levels and
the Control page shows two devices (figure 3b).
Figure 8: Simple partitioning and level assignment