Utah Sandar UTAH-100, Руководство пользователя и инструкция по установке

Страница: 48 / 80

User Manual & Installation Guide
UTAH-100/XHDA Series
Document: SA3228-User-1.1
Date: 2009-10-07, Rev. 1.1
GENERAL DESCRIPTION
The UTAH-100/XHDA HD3G Distribution frame
comes in two versions. The 1:4 x
8 contain 8 separate 1:4 digital wideband distribution amplifiers. The 1:8 x 4 contains 4 separate 1:8
digital wideband distribution amplifiers. The data rates supported by reclocking are 143, 177, 270, 360,
540, 1483.5, 1485 Mbps and 3Gbps. These units are well suited for all digital Broadcast and Telecom
distribution systems. With Automatic Cable Equalizer supporting up to 300m (SD-SDI) cable, auto detect
reclockings supporting all known digital broadcast standards and proper Cable Drivers on the outputs.
The Ethernet (SNMP/HTTP/SanEth) interface gives possibilities for monitoring voltage, temperature and
signal types.
The UTAH-100/XHDA is delivered with a standard off-the-shelf universal AC/DC Power Supply. To
reduce the possibility of power interrupt the unit is equipped with two DC connectors for redundancy
powering. Extra Power Supply is an option and is not delivered as standard.
The 19” wide, 1RU high and 60 millimetres deep frame houses the switch, local control unit and
Ethernet remote control interface. Two 12 VDC 2,1mm power input connectors enable use of redundant
power supplies.
External Power Supply
The external Power Supply is an AC/DC Switch Mode desktop power supply module with compact
design. The power supply has a universal input voltage, with 3 pins IEC 320 connector. The output
voltage is 12V DC and is short circuit proof and deliver up to 40W. One secondary cable with the
modular connector in the one end connects to the power supply and the other end with a 5.5/2.1mm jack
connects to the UTAH-100/XHDA frame. Utah Sandar recommends the Power Supply 9920 from
Mascot A/S, but other types of Power Supplies may be used with similar specifications.
Mains cord is
not included.
Mounting bracket is available.
POWER INPUT
Power Connection
The UTAH-100/XHDA units have two 2.1mm DIN 12VDC connector with + at centre.
The power unit supplied with the UTAH-100/XHDA is a 13.2 VDC with a max rating of 3A (40W)
6