Utah Sandar UTAH-100, Руководство пользователя и инструкция по установке

Страница: 31 / 80

User Manual & Installation Guide
UTAH-100/X AA Series
Document: 3212-user10
Date: 2009-10-26, Rev. 1.0
3
Utah Sandar
Thorøyaveien 11
N-3209 Sandefjord,
Norway
Tel.: +47 33 52 27 00
Fax: +47 33 52 27 01
INTRODUCTION
Thank you for choosing a Utah Sandar product.
We are convinced that your choice will prove to be a wise
and worthy decision for many years to come.
Your Utah Sandar product has been tested for performance at the
factory according to the specifications given for the system in this
manual. However, before putting the device into
operation we kindly ask you to read this manual, and
act according to the information given.
All information given in this document is property of Utah
Sandar. To the knowledge of Utah Sandar there are no
errors in the manual. Should any errors be discovered,
please notify Utah Sandar. Utah Sandar will under no
circumstances accept responsibility neither for errors in this
manual, nor consequences of such errors.
WARRANTY
This Utah Sandar product is warranted against defects in materials and workmanship for a period of two
(2) years from the date of invoice. During the warranty period, Utah Sandar will, at its option, either
repair or replace products that prove to be defective.
The warranty shall not apply to defects resulting from improper or inadequate installation or
maintenance by buyer, buyer-supplied software or interfacing, unauthorized modification or misuse,
operation outside of the environmental specifications for the product, or improper site preparation or
maintenance.
If a product needs to be returned for service, please first contact the Utah Sandar Helpdesk to obtain a
Return Material Authorization (RMA) number. Make sure the packaging provides sufficient protection
against ESD and mechanical damage. Please enclose a note with the RMA, return address, contact
person details and a failure symptom description.
DOCUMENT REVISION HISTORY
Rev. Date Description
1.0 2009-10-26 Updated document
B 2009-08-27 Changed product name and company name
A 2008-08-07 Preliminary